White and light coloured fabrics.

Wet-on-wet printing

Direct prints and transfers


Controls ink build-up

Excellent release from screen

Very soft hand


The use of additives or reducers is not generally recommended with this ink.


Mesh counts from 86T-305T) may be used. Mesh counts over 180T will increase the ink mileage and produce very soft hand prints.


Use any direct emulsion or capillary film.

Polyplus SRX
Murakami TXR

Product Description

Autoline plastisol ink is a state of the art ink designed to produce high quality prints on high speed automatic presses. Its quick release from the screen provides smooth, strong colours even when using light squeegee pressure. The ink penetrates well and does not build up on the back of succeeding screens. Because of Autoline’s soft hand and easy printing qualities it’s also an excellent choice for printing on manual presses. Autoline inks are designed to be printed wet-on-wet but work equally well over a first down flash-cured white on dark garments. Autoline inks can also be used in the product of both hot-split and cold-peel transfers.

Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements before using in production.

Color Range

Note that colours shown on screen can vary to true ink colours.




Neon Cerise


Traffic Green












Red B/S



Related Product

  • Urocure


    Urocure is a two-pack, pigmented, Urethane ink system requiring the addition of a reactive catalyst …Read More »
  • Two Can Epoxy

    Two Can Epoxy

    The Two Can Epoxy ink series exhibit excellent solvent and chemical resistance and offer a …Read More »
  • Corrogloss


    The Corrogloss system was developed for the printing of fully Corona-treated corrugated plastic sheets (Corflute) …Read More »

Website by BeMedia