Avient FX Liquid Metallics

Avient Speciality Ink Infinite FX Liquids are a special effet with a very-fine metallic flake for an opaque, wet metallic chrome or gilded gold look with a smooth and soft feel.  The Liquid Silver and God are ready-for-use or can be tinted using plastisol colourants for a custom look.

Printing Tips:

Stir inks before printing

Use consistent, high-tensioned screen mesh to optimize performance properties

For best results, use recommended mesh counts and print-flash-print

 Print direct to fabric or over a flashed-dried base plate. Use a suitable underbase when printing
on garments prone to bleed

Tintable with plastisol colorants. See Pigment Loading section for suggested tinting
percentages. Adjust the % colorant added based on the strength of the colorants and color
saturation desired
Print liquid metallics in last position or flash after each print if using multiple screens

Metallics reflect infrared heat and a forced air dryer is recommended for curing. If using an
electric oven, extend dwell time to achieve proper cure

Liquid Metallics may tarnish (turn gray) when exposed to detergent or water that contains
bleaching or whitening agent. For best care, hand wash or machine wash on cold cycle with
garment inside-out using a phosphate free detergent, then air or line dry. Label garments with
suggested wash instructions

Pigment Loading:

up to 5% Wilflex PC
up to 10% Wilflex EQ
up to 30% Wilflex MX/RIO
up to 10% Rutland C3 Boosters