Excellent adhesion to fabrics, stretch
properties, and wash durability.
Ready-for-use or tintable
Brilliant glitter or sparkle effect to enhance
Count: 9-15 t/cm
Tension: 25-35 n/cm2
2 over 2
Off Contact: .2cm
Kiwo Poly Plus SRX
Avient™ Specialty Inks INFINITE FX GLITTERS are special effects with a large-course glitter particle
to bring a brilliant dazzle to print designs. The large glitter particles allow the base layer color to
show through further enhancing the design possibilities and color combinations. Infinite FX Silver
and Gold Glitters are ready-for-use or can be tinted using plastisol colorants for a custom look.
These glitters are low-cure special effects with excellent adhesion and wash durability.
Stir inks before printing
Use consistent, high-tensioned screen mesh to optimize performance properties
Print in last position or flash after each print if using multiple screens
Print direct to fabric or over a flashed-dried base plate. Use a suitable underbase when printing
on garments prone to bleed.
Tintable with plastisol colorants. See Pigment Loading section for suggested tinting
percentages. Adjust the % colorant added based on the strength of the colorants and color
Metallics reflect infrared heat and a forced air dryer is recommended for curing. If using an
electric oven, extend dwell time to achieve proper cure.
Can be mixed with other Infinite FX HD bases or clears.
For cold-peel transfers, use a coated release paper or polyester film. Print using 70 duro
squeegee and recommended mesh counts followed by adhesive. Gel at 212°F (100°C) for 60
sec. Apply transfer with heat press at 300°F (150°C) for 10-12 sec at medium pressure. For
transfers on polyester, back with a low bleed white and/or blocker. Verify process.
Note that colours shown on screen can vary to true ink colours.