Excellent adhesion to fabrics, stretch properties and wash durability.
Use on various coloured grounds and underbase for different effects.
Add metallic flakes to base for infinite designs.
Low cure, save energy.
Tintable with plastisol colourants.
Can use Wilflex and Rutland Pigments to underbase.
Count: 34-62 t/cm
Tension: 25-35 n/cm2
2 over 2
Off Contact: .2cm
Kiwocol Poly Plus SRX
Avient™ Specialty Ink INFINITE FX SHIMMERS are a special effect with a fine-medium size metallic
flake for a brilliant shimmer effect with a smooth and soft feel. These shimmers are ready-for-use or can be tinted using plastisol colorants for a custom look.
Stir inks before printing
Use consistent, high-tensioned screen mesh to optimize performance properties.
Print in last position or flash after each print if using multiple screens.
Print direct to fabric or over a flashed-dried base plate. Use a suitable underbase when printing
on garments prone to bleed.
Tintable with plastisol colorants. See Pigment Loading section for suggested tinting
percentages. Adjust the % colorant added based on the strength of the colorants and color
Metallics reflect infrared heat and a forced air dryer is recommended for curing. If using an
electric oven, extend dwell time to achieve proper cure.
Can be mixed with other Infinite FX HD bases or clears.
or cold-peel transfers, use a coated release paper or polyester film. Print using 70 duro
squeegee and recommended mesh counts followed by adhesive. Gel at 212°F (100°C) for 60
sec. Apply transfer with heat press at 300°F (150°C) for 10-12 sec at medium pressure. For
transfers on polyester, back with a low bleed white and/or blocker. Verify process.
up to 5% Wilflex PC
up to 10% Wilflex EQ
up to 15% Wilflex RIO / MX
up to 10% Rutland C3 Boosters
Note that colours shown on screen can vary to true ink colours.